Carson Sirens
Carson Sirens are backed by a no-hassle 5-year limited warranty

The SC-409 Commander Siren

Police Siren and Law Enforcement Siren is the Ultimate of Technology, Styling, and Control

The SC-409 Commander most notable, new technological features include the video trigger option on each light switch outputs, face programmable auxiliary switches to select the switch function for either on/off, on/off with video trigger, momentary, and 10 or 20 second timed momentary, a splash resistant rubberized face with integrated membrane push button controls and liquid repelling actuator flanges, and exposed fuses that are included in the output diagnostic status on the face.

• 100/200-watt electronic siren amplifier with 140 amps of light control
• Programmable lever/slide switch with the flexibility to be either progressive, non-progressive, or partially progressive
• 6 face programmable auxiliary membrane switches with the option to be on/off, on/off with Video Trigger, momentary or 10 or 20 second timed momentary
• Siren Wail, Yelp, Phaser, Manual, and Air Horn tones with optional Two-Tone/HiLo sound
• Six position rotary switch and two momentary membrane switches for Manual and Air Horn override
• PA override with attached noise-canceling microphone and face mounted volume control knob
• Face and DIP switch programmable siren features
• LED Backlighting and auxiliary switches turn red when activated
• Horn Ring Cycler 2 (HRC2) for hands free siren tone control on the Cycler position on the rotary switch
• Video Trigger output automatically initiates the record on a video camera system and is activated by each position on the lever/slide switch and on programmed auxiliary switches
• Timed Override toggles the selected tone on the rotary switch up one to the next intense siren tone for 10 seconds and then toggles back to selected tone
• Sweep and Intersection modes are automatic sequences of Yelp, Phaser, and Air Horn at different speeds activated by tapping the horn ring when the rotary switch is in either the Wail, Yelp or Phaser position
  Siren Cutout/Park Kill to disable the siren when exiting the vehicle with option to disable position 3 on the lever/slide switch
• Splash resistant rubberized face with built in membrane push button switches and liquid repelling actuator flanges
• Exposed fuses on the bottom side of the siren to protect each output
  Short circuit, high voltage, and reverse polarity protection system
  Detachable wiring connectors with screw-down terminals for the siren and auxiliary outputs and heavy-duty screw-down terminals for the lever/slide switch outputs
• Mounting brackets for the siren and PA microphone
• 2-3/4" H x 6-1/8" W x 8" D
• No-hassle 5-year limited warranty

Would you like to see a comparison of the SC-409 to some other models ?

The SA-360 Defender Siren

Emergency Vehicle Siren, Fire Rescue Siren, and Console Mount Siren

The SA-360 Defender 100-watt siren combines simple operation, reliable performance and rugged durability. The SA-360 Defender features a pair of three position rocker switches to select between a siren wail, yelp, phaser, manual and air horn tones with the European HiLo/two-tone sound as an optional substitute. The siren also features the new Horn Ring Cycler 2 (HRC2) function that enables the driver hands-free control of the siren by cycling through the tones with the vehicles horn.

The SA-360 Defender Siren is designed to work with a single 100-watt siren speaker and includes a mounting bracket, external fusing, short circuit, high voltage and reverse polarity protection systems and an output indicator light for diagnostic purposes.

• Compact 100-watt electronic siren amplifier
• Siren Wail, Yelp, Phaser, Manual and Air Horn tones with optional European HiLo/Two Tone
• Two rocker switches for siren tone control
• Horn Ring Cycler 2 (HRC2) for hands free siren tone control
• DIP switch programmable
• Externally fused
• Short circuit, high voltage and reverse polarity protection systems
• Output diagnostic LED
• Mounting bracket
  2" H x 6" W x 6" D
• No-hassle 5-year limited warranty

See a comparison of the SA-360 to some other models.

The SA-361 Defender Siren

Police Siren, Motorcycle Siren, Rescue Vehicle Remote Siren

• Compact 100-watt electronic siren amplifier
• Siren Wail, Yelp, Phaser, Manual and Air Horn tones with optional European HiLo/Two Tone
• Two rocker switches for siren tone control
• Horn Ring Cycler 2 (HRC2) for hands free siren tone control
• DIP switch programmable
• Externally fused
• Short circuit, high voltage and reverse polarity protection systems
• Output diagnostic LED
• Mounting bracket
  2" H x 6" W x 6" D
• No-hassle 5-year limited warranty

See a comparison of the SA-361 to some other models.

The SA-380 Alert Siren

Police Siren, Law Enforcement Siren and Console Mount Emergency Vehicle Full Featured Siren

This new, stylish, economical 100-watt SA-380 Alert siren with P.A. features easy to use controls such as a four position rotary switch with intuitive selection of siren tones and a push button override for Manual and Air Horn. The P.A. system includes a noise-canceling microphone and face mounted volume control knob. The output diagnostic status is indicated on the face and the unit is LED backlit. The siren is also equipped with the Horn Ring Cycler 2 (HRC2) for safe hands-free control of the siren during extreme driving, DIP switch selections for quick and easy customization during installation, and an exposed in-line fuse for protection.

The SA-380 Alert Is Just What You Need
A couple of the major changes that provided some of the greatest cost saving included setting the siren output capabilities to 100-watts and eliminating the Radio feature. For those currently installing only one 100-watt speaker with their siren, this change has no effect on the sound level produced. The Radio feature was removed as a result of more and more emergency response personnel are equipped with personal radios and the need for broadcasting radio communications over the siren speaker has diminished.

• Compact 100-watt electronic siren amplifier
• Siren Wail, Yelp, Phaser, Manual and Air Horn tones with optional Two-Tone/HiLo Tone
• Four position rotary switch with push-button override
• PA override with attached noise-canceling microphone and PA volume control
• LED backlighting
  Horn Ring Cycler 2 (HRC2) for hands-free tone control
• DIP switch programmable
• Exposed in-line fuse
  Short circuit, high voltage and reverse polarity protection system
• Output diagnostic LED
• Enable Input or Instant On selected on DIP switch to power up siren
• Short Manual
• Mounting brackets with the siren and PA microphone
• 2" H x 6" W x 6" D
• No-hassle 5-year limited warranty.

View a comparison of the SA-380

The SA-400 Classic Siren

Police Siren, Ambulance Siren, and Console Mount Emergency Vehicle Siren

The SA-400 Classic Siren 100/200-watt siren features a rotary switch for selecting siren tones and radio, a momentary push button for tone override, a master on/off switch, a noise-canceling PA microphone and a large PA volume control knob. The siren also features LED backlighting and the Horn Ring Cycler (HRC) function that enables the driver hands-free control of the siren by cycling through the tones with the vehicles horn.

100/200-watt electronic siren amplifier
Siren Wail, Yelp, Phaser, Manual and Air Horn tones with optional European HiLo/Two Tone
Six position rotary switch with a momentary push-button override
PA override with attached noise-canceling microphone and large PA volume control knob
LED backlighting
Horn Ring Cycler (HRC) for hands free siren tone control
DIP switch programmable
Externally fused
Short circuit, high voltage and reverse polarity protection systems
Splash-resistant face
Wiring connector
Mounting bracket
2-1/2" H x 6-1/8" W x 5-3/8" D
No-hassle 5-year limited warranty

View a comparison of the SA-400 to some other models.

The SA-430 Patriot Siren

Ambulance Siren, EMS Siren, and EMT Remote Siren

The SA-430 Patriot features a rotary switch for selecting siren tones and radio, a momentary push button for tone override, a master on/off switch, a noise-canceling PA microphone and a large PA volume control knob. The remote siren also features LED backlighting and the Horn Ring Cycler 2 (HRC2) function that enables the driver hands-free control of the siren by cycling through the tones with the vehicles horn

• 100/200-watt electronic siren amplifier
• Single lead connection between the control head and amplifier
• Siren Wail, Yelp, Manual, Phaser, and Air Horn tones with optional European HiLo/Two-Tone siren tone
• Six position rotary switch with a momentary push-button override
  PA override with attached noise-canceling microphone and large PA volume control knob
• LED backlighting
  Horn Ring Cycler 2 (HRC2) for hands free siren tone control
• DIP switch programmable
• External fusing
• Short circuit, high voltage and reverse polarity protection systems
• Wiring connector
• Mounting brackets for the PA microphone
• Control Head: 2-7/8" H x 6-1/4" W x 1" D
• Amplifier: 2-1/8" H x 8" W x 6-3/4" D
• No-hassle 5-year limited warranty

View a comparison of the SA-430 Patriot to some other models.

The SA-441 Magforce Siren

Ambulance Siren, EMS Siren, and EMT Remote Siren is Two Emergency Vehicle Sirens In One

The SA-441 MagForce 200-watt full featured siren features a rotary switch for selecting siren tones and radio, a momentary push button for tone override, a master on/off switch, a dual mode switch, a noise-canceling PA microphone and a large PA volume control knob. The remote siren also features LED backlighting and the Horn Ring Cycler 2 (HRC2) function that enables the driver hands-free control of the siren by cycling through the tones with the vehicles horn.

• 200-watt electronic 2 channel siren amplifier delivers dual tone capabilities
  Dual mode switch to select between single and dual tone modes
• Single lead connection between the control head and amplifier
• 12 different tone combinations using Wail, Yelp, Manual, Phaser, and Air Horn tones with optional European HiLo/Two-Tone siren tone
• Six position rotary switch with a momentary push-button override
  PA override with attached noise-canceling microphone and large PA volume control knob
• LED backlighting
• Horn Ring Cycler 2 (HRC2) for hands free siren tone control
• DIP switch programmable
• External fusing
• Short circuit, high voltage and reverse polarity protection systems
  Wiring connector
• Mounting brackets for the PA microphone
• Control Head: 2-7/8" H x 6-1/4" W x 1" D
• Amplifier: 2-1/8" H x 8" W x 6-3/4" D
• No-hassle 5-year limited warranty

View a comparison of the SA-441 to some other models.

The SA-500 Cruiser Siren

Police Siren, Ambulance Siren, and Console Mount Vehicle Emergency Siren

The SA-500 Cruiser siren features a rotary switch for selecting siren tones and radio, two momentary push buttons for tone override, separate volume controls knobs for Radio and PA, a master on/off switch and a noise-canceling PA microphone. The siren also features LED backlighting, the new Horn Ring Cycler 2 (HRC2) function that enables the driver hands-free control of the siren by cycling through the tones with the vehicles horn, and Siren Cutout / Park Kill to disable the siren when exiting the vehicle.

The Compact 2" High Full Feature Siren

• Compact 100/200-watt electronic siren amplifier
• Siren Wail, Yelp, Phaser, Manual and Air Horn tones with optional European HiLo/Two Tone
• Four position rotary switch with two push-button overrides
• PA override with attached noise-canceling microphone and separate radio and PA volume control knobs
• LED backlighting
• Horn Ring Cycler 2 (HRC2) for hands free siren tone control
• Siren Cutout / Park Kill to disable siren when exiting the vehicle
• DIP switch programmable
• Internally fused
• Short circuit, high voltage and reverse polarity protection systems
• Output diagnostic LED
• Wiring connector with screw-down terminals
• Mounting brackets with the siren and PA microphone
• 2-1/8" H x 6-1/8" W x 5-7/8" D
• No-hassle 5-year limited warranty

View a comparison of the SA-500 to some other models.

The SC-407 Enforcer Siren

Police Siren and Law Enforcement Siren is a Full-Feature Siren with Light Control

The SC-407 Enforcer Siren features a rugged lever/slide switch for primary light and siren control, 4 lighted rockers for auxiliary lights and equipment and 2 oversized rockers and momentary push buttons for siren tone control, separate volume control knobs for Radio and PA volume control and a noise-canceling PA microphone. Plus it features programmable hands free controls like Horn Ring Cycler (HRC) function that enables the driver to cycle through the siren tones with the vehicles horn and Siren Cutout or Park Kill to disable the siren when exiting the vehicle

• 100/200-watt electronic siren amplifier with 140 total amps of light control
• Lever/slide switch for 60 amps of primary light control and 4 illuminated rockers for 20 amps each of auxiliary light control
• Siren Wail, Yelp, Phaser, Manual and Air Horn tones with optional European HiLo/Two Tone siren tone
• Rocker switch siren function control with momentary push-button override
• PA override with attached noise-canceling microphone and separate radio and PA volume control knobs
• LED backlighting
• Horn Ring Cycler (HRC) for hands free siren tone control
• Siren Cutout / Park Kill to disable the siren when exiting the vehicle
• Internally fused
• Short circuit, high voltage and reverse polarity protection systems
  Wiring connector with screw-down terminals for the siren
• Mounting brackets for the siren and PA microphone
• 2-3/4" H x 6-1/8" W x 5-7/8" D
• No-hassle 5-year limited warranty

View a comparison of the SC-407 to some other models.

The SB-008 Phantom Switch Box

Emergency Vehicle Light Switch Box, Lightbar Controls

The introduction of the SB-008 Phantom signifies major advancements in the emergency vehicle light control technology. With complete programmability and DIP switch locking, manage everything from your lightbar to gunlocks and video system to auxiliary lights with this sleek, compact control unit.

At less than 1 ½" high, the SB-008 Phantom Switch Box is almost half the size of a regular switch box. But the Phantom's slim, sleek appearance cannot mask its superior power and versatility

• Complete programmability with DIP switch locking
• Up to 7 switches for gun lock timers
• Master Switch grouping capabilities
• 20 Amps capacity per circuit for up to 160 total amps
• Externally exposed fuses and diagnostic for easy replacement
• 8 completely enclosed membrane push button switches for splash-resistant protection
• Remote enabled LED backlighting that turns red when activated
• 72 Replaceable legends
• Unpluggable wiring connectors for outputs, backlighting and ground
  Alert indicator when switches activated
• 1-3/8" H x 6-1/8" W x 6-1/2" D
• No-hassle 5-year limited warranty
  

THE SC-550 STEALTH SIREN

POLICE SIREN AND LAW ENFORCEMENT SIREN IS THE PREMIERE HAND-HELD LIGHT CONTROL SIREN

This light control siren puts the traffic clearing power right in the palm of your hand. The SC-550 Stealth hand-held control and remote 100/200-watt amplifier is ideal for undercover and unmarked vehicles, as well as other applications where being inconspicuous is desired, console space is limited, or remote mounting is needed. It's rugged, low-profile design provides additional operating stability whether you run it as a true hand-held, mounted on the dash, or next to you on the seat.
The SC-550 Stealth hand control features a completely enclosed, splash-resistant rubberized face with built in PA microphone and volume control dial that also turns the light control siren on. Designed to work with one or two 100-watt speakers, the siren includes a 6 position rotary switch and siren override membrane push button switch for tone control. A slide switch to control the vehicles primary lights and 4 membrane push buttons switch for the auxiliary lights gives the Stealth siren up to 140 total amps of light control.
THE SC-550 STEALTH SIREN IS THE PREMIERE HAND-HELD LIGHT CONTROL SIREN
The SC-550 Stealth Siren features several DIP switch programmable options including the Horn Ring Cycler 2 (HRC2) function that enables the driver to cycle through the siren tones with the vehicles horn and Siren Cutout / Park Kill to disable the siren when exiting the vehicle. The control head is LED backlit and the amplifier and light control circuits are protected by external fusing, short circuit, high voltage and reverse polarity protection systems. The siren is installed using a wiring connector with screw-down terminal for the siren while the vehicles lights are connected using heavy-duty screw-down terminals. As with all Carson Sirens products, the Stealth siren is backed by a no-hassle 5-year limited warranty.
• 100/200-watt electronic siren amplifier with 140 amps of light control
• Completely enclosed rubberized face for improved splash resistance
• PA microphone and volume control dial built in to hand-held control unit
• Siren Wail, Yelp, Manual, Phaser, and Air Horn tones with optional European HiLo/Two-Tone siren tone
• Six position rotary switch with a momentary membrane push-button override
• Slide switch for 60 amps of primary light control and 4 membrane push button switches for 20 amps each of auxiliary light control
• DIP switch programmable
• Horn Ring Cycler 2 (HRC2) for hands free siren tone control
• Siren Cutout / Park Kill to disable the siren when exiting the vehicle
• LED Backlighting
• Externally fused
• Short circuit, high voltage and reverse polarity protection systems
• Wiring connector with screw-down terminals for the siren and heavy-duty screw-down terminals for the lights
• Hand Control Unit: 6" H x 2-3/4" W x 1" D
• Amplifier: 2-1/8" H x 7-1/2" W x 6-3/4" D
• No-hassle 5-year limited warranty

View a commparison of the SC-550 to some other models.

SC-1002 VOLUNTEER SIREN

THE SIREN THAT CLEARS THE WAY

The SC-1002 Volunteer 100-watt siren with light controls was designed with the volunteer firefighter in mind. The SC-1002 Volunteer siren features two 3-position rocker switches to select between wail, yelp, manual, and mechanical tone. Two push buttons for air-horn and phaser with the European HiLo/two-tone sound as an optional substitute. The siren also features the Horn Ring Cycler (HRC2) function that enables the driver hands-free control of the siren by cycling through the tones with the vehicles horn. Two lighted rocker switches are also included for controlling emergency lights.
The SC-1002 Volunteer Siren offers the reliable performance, and rugged durability with consistent quality that comes with every Carson Siren.

This siren is designed to work with a 100-watt speaker and ensures you the strength to get you where you need to go and be heard like one of the big fire trucks. The siren tones may be changed or disarmed using an internal Dip switch. An output indicator light is on the face of the siren for diagnostic purposes. The light controls are capable of switching up to 20 amps. The siren is LED backlit and is installed using heavy duty screw down terminals for power and a detachable connector for the speaker and lights. The amplifier and light controls are fused separately on the back of the unit. As with all Carson Sirens products, the SC-1002 Volunteer is backed by a no-hassle 5-year limited warranty.
• Compact 100-watt electronic siren amplifier with 20 total amps of light control
• Two illuminated rockers for light control
• Siren Wail, Yelp, Phaser, Manual, Air Horn, and Mechanical tone with optional European HiLo/Two Tone siren tone
• Rocker switch siren function control with momentary push-button override
• DIP switch programmable tones
• Two rocker switches control lights
• DIP switch programmable
• LED backlighting
• Horn Ring Cycler (HRC2) for hands free siren tone control
• Amplifier and light controls fused separately and externally
• Short circuit, high voltage and reverse polarity protection systems
• Sound output indicator light for diagnostics
• Detachable wiring connector and screw down terminals for power
• Mounting bracket
• 2" H x 6" W x 6" D
• No-hassle 5-year limited warranty

View a comparison of the SC-1002 to some other models.

SC-1012 VOLUNTEER REMOTE SIREN

THE SIREN THAT CLEARS THE WAY

The SC-1012 Volunteer 100-watt remote siren with light controls was designed with the volunteer firefighter in mind offering complete versatility. This unit gives you flexibility in the placement of the remote switch panel and amplifier. The remote switch panel features two 3-position rocker switches to select between wail, yelp, manual, and mechanical tone. A momentary rocker switch for air-horn and phaser with the European HiLo/two-tone sound as an optional substitute. The siren also features the Horn Ring Cycler (HRC2) function that enables the driver hands-free control of the siren by cycling through the tones with the vehicles horn. Two lighted rocker switches are also included for controlling emergency lights.
The SC-1012 Volunteer Remote Siren offers the reliable performance, and rugged durability with consistent quality that comes with every Carson Siren.

This siren is designed to work with a 100-watt speaker and ensures you the strength to get you where you need to go and be heard like one of the big fire trucks. The remote panel may be mounted with holes in the top or bottom. The siren tones may be changed or disarmed using an internal Dip switch. An output indicator light is on the face of the remote amplifier for diagnostic purposes. The light controls are capable of switching up to 20 amps. The siren is LED backlit and is installed using heavy duty screw down terminals for power and detachable connectors for the speaker and lights and remote switch panel. The amplifier and light controls are fused separately on the back of the unit. As with all Carson Sirens products, the SC-1012 Volunteer is backed by a no-hassle 5-year limited warranty.
• Compact 100-watt electronic siren amplifier with 20 total amps of light control
• Two illuminated rockers for light control
• Siren Wail, Yelp, Phaser, Manual, Air Horn, and Mechanical tone with optional European HiLo/Two Tone siren tone
• Rocker switch siren function control with momentary rocker switch override
• DIP switch programmable tones
• Power indicator on remote amplifier
• Horn Ring Cycler (HRC2) for hands free siren tone control
• Amplifier and light controls fused separately and externally
• Short circuit, high voltage and reverse polarity protection systems
• Sound output indicator light for diagnostics
• Detachable wiring connectors and screw down terminals for power
• Mounting bracket
• 2" H x 6" W x 6" D
• No-hassle 5-year limited warranty

View a comparison of the SC-1012 to some other models.